Instruction Manual
6
Connect the AC Adapter cord to the DC Power Port on the rear panel
1.
of the drive enclosure. Connect the remaining end of the adapter to an
available electrical outlet.
Insert the Type ‘B’ connector provided by the USB cable into the USB
2.
Type ‘B’ port on
the rear panel of the enclosure. Connect the remaining end to an
3.
available USB port on the host computer.
Press the Power Switch to the ON position.
4.
Disconnecting the Enclosure from the Computer
Windows XP/2000/2003 Server/Vista™
Double-click on the Safely Remove Hardware icon, located in the
1.
System Tray (typically located on the bottom right corner of the
desktop).
Select USB Mass Storage Device from the list, and click on
2.
Stop.
Select the drive to be disconnected, and click
3.
OK
.
Click on
4.
Close
and turn the Power Switch on the enclosure to the
OFF
position.
It is now safe to disconnect the Enclosure from the computer, by
5.
removing the USB cable.
WARNING:
Do not disconnect any cables or power sources while the
hard drive is active. This can result in data loss and possible damage to
the hard drive.
WARNING:
To prevent data loss, please ensure that all active applica-
tions areclosed, prior to shutting down power to the drive.
