Instruction Manual
7
If you want to access the locked device temporarily, simply highlight it and press
<
ENTER
>, the OSD will ask you for the password. After entering the correct password,
you are allowed to use the device. This device is automatically re-locked once you
switch to another port. During Scan mode, OSD skips the security-enabled device.
NOTE:
If you forget the password, the only way to permanently erase all of the
passwords is to: For SV831DUSBU/SV831DUSBUK and SV1631DUSBU/SV1631DUSBUK,
press and hold the 1 and 2 front panel buttons, then hold 7 and 8. Release 7 and 8,
then release 1 and 2. For SV431DUSBU, press 3 and 4 instead of 7 and 8.
Function key <F4>:
More functions are available by hitting <
F4
>. A new screen pops
up displaying more functions as described below. Most of them
are
marked
with
a
triangle
(
►
) indicating there are options to
choose
from.
Using
the
<
UP
> and <
DOWN
> arrow keys, select the
functions
and
press
<
ENTER
>. Available options will be shown
in the middle of the screen. Again, using the <
UP
> and <
DOWN
>
arrow
keys
to
view
options
then
press
<
ENTER
> to select it. You
can
press
<
ESCAPE
> to exit at any time.
Auto Scan
In this mode, the KVM Switch automatically switches from one power-on computer
to the next, sequentially, in a fixed interval. During AutoScan mode, the OSD displays
the name of the selected computer.
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning
till activity stops; it then resumes with the next computer in sequence. To abort Auto
Scan mode, press the left <
CTRL
> twice, or, press any front button. Scan Type and Scan
Rate set the scan pattern. Scan Type (<
F4
>: More\Scan Type) determines if scanned
computers must also be eye mark selected. Scan Rate(<
F4
>: More\Scan Rate) sets the
display interval when a computer is selected before selecting the next one.
Manual Scan
Scan through power-on computers one by one by keyboard control. You can type
(<
F4
>: More\Scan Type) to determine if scanned computers must also be eye
mark selected. Press the <
UP
> arrow key to select the previous computer and the
<
DOWN
> arrow key to select the next computer. Press any other key to abort Manual
Scan mode.
Scan Type:
Ready PC +
N
:
In Scan mode, scans through power-on computers and those with
the eye mark on the selected ports.
Ready PC:
In Scan mode, scans through all power-on computers.
N
only:
In Scan mode, scans through any selected computer regardless of computer
power status with an eye mark.
Scan Rate:
Sets the duration of a computer displayed in Auto Scan mode. The options
are 3 seconds, 8 seconds, 15 seconds and 30 seconds. The non-volatile memory stores
the Scan Rate setting.
