Instruction Manual
18
Help:
Lists information and walk-throughs regarding operation of the application.
Device Search Mode:
Enables you to define your preferred method of transmitter and receiver identification
over your network that the software uses. You can choose between two methods of
identification: Multicast DNS or Target IP for your transmitters and receivers.
Multicast DNS:
is the default setting and will search automatically for devices over
the network.
Target IP:
is an advanced setting that enables you to specify an IP address that
the remote devices are set to in order for the software to identify them. This is a
good option if you’d like multiple set ups with different displays and transmitters on
different subnets and IP address ranges.
Clear All Settings:
Restores your software to default settings.
Demo Mode:
Creates a virtual environment with multiple transmitters and receivers that enables
you to configure a virtual setup without connected transmitters and receivers to test
the functionality of the software.