10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
7.
Connect the other end of the Cat5e/6 cable (from LINK OUT
B) to the LINK IN B (RJ-45 connector) on the Receiver Unit.
Note:
If extending a 1080p signal over CAT6 cables, the
maximum distance is 40m (130 ft).
8.
Position the Receiver Unit near the video display (i.e.
television, projector).
9.
Connect the video source to the HDMI® OUT on the Receiver
Unit using an HDMI® cable.
10.
(Optional) If you’ve chosen to power the kit from the
Receiver side, connect the provided power supply.
11.
Your source video image will now appear on the remote
video display.
Operation
Video Adjustment (Receiver Unit Only)
This function allows adjustments in sharpness of the video
image for better clarity. If necessary, adjust the EQ Selector
at the Receiver Unit to compensate cable length. Turn the EQ
Selector one notch at one time and wait for 10~12 sec. For
HDMI cable length (Rx-to-monitor) less than 8 meters, the
selector position is around 0~7 (depends on video resolution).
For HDMI cable length (Rx-to-monitor) greater than 8 meters,
the selector position is around 8, 9, A~F (depends on video
resolution).
For example, if using a 1.8M (or 3.0M) HDMI cable, a CAT5 cable
and a display with resolution of Full HD (1920 x 1080), you may
adjust video according to its CAT5 cable length as follows:
