9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2.
Connect an HDMI® cable from the video source device
(i.e. computer, Blu-ray Player) to the “HDMI® IN” on the
Transmitter Unit.
3.
(Optional) If you’ve chosen to power the kit from the
Transmitter side, connect the provided power supply.
4.
Connect an RJ45 terminated Cat5e/6 Ethernet cable (not
included) to the LINK OUT A (RJ-45 connector) on the
Transmitter unit.
5.
Connect another RJ45 terminated Cat5e/6 Ethernet cable
(not included) to the LINK OUT B (RJ-45 connector) on the
Transmitter unit.
Note:
If you are using surface cabling, ensure you have
enough Category 5e unshielded twisted pair (UTP) network
cabling to connect the Host Unit to the Remote Unit’s loca-
tion, and that each end is terminated with a RJ45 connector.
The cabling should not go through any networking equip-
ment (i.e. router, switch).
- or -
If you are using premises cabling, ensure that the Category 5
unshielded twisted pair (UTP) network cabling between the
Host Unit and the Remote Unit has been properly terminated
in a wall outlet in each location and there is a patch cable
long enough to connect the Remote Unit and the Host Unit
to their respective outlets. The cabling should not go through
any networking equipment (i.e. router, switch).
6.
Connect the other end of the Cat5e/6 cable (from LINK OUT
A) to the LINK IN A (RJ-45 connector) on the Receiver Unit.
