4
Remove the drive trays from the backplane by pressing the colored
9.
tray release latch to the left and swing it open. Pull the drive trays
out of the backplane.
If using a 9.5mm height drive, then the top of the drive tray does
10.
not need to be removed. Just slide the drive into the tray from the
sides, then fasten the drive to the tray from the bottom side with 4
screws (included).
If using a drive taller than 9.5mm, then the top of the drive tray
needs to be removed. Release the screw located near of the rear
of the tray, then pull the top of the tray off. Place the drive onto the
tray and fasten from the bottom using 4 screws (included).
