Instruction Manual
5
the DC Power Port located on the rear panel of the Enclosure. Connect the remaining
end of the Power Adapter to an available power outlet.
4. Move the Power Switch on the rear panel of the Enclosure to the
ON
position. If the
Enclosure is connected to a host computer that is running Windows ME or above, or
Mac OS 9x or higher, the operating system on the host computer will detect that the
connection is present, and install the necessary drivers. If the host computer is running
Windows 98, please follow the instructions listed in the next section, titled
Driver
Installation
.
If you are installing an optical drive, such as a CD/DVD-ROM drive etc., you may be
required to install software that is specific to the drive. If this is the case, please ensure
you have the files available from the drive manufacturer. For further information on this
step, please consult the documentation that accompanied the optical drive.
Driver Installation
If the host computer to which SAT5210U2E is connected is running Windows 98, additional
driver installation is required for the operating system to recognize that a USB device has
been connected.
To install the necessary drivers, insert the Driver CD (included) into the CD/DVD-ROM
drive:
1.
When the Add New Hardware Wizard
appears, please click on
Next
.
2.
Select
Search for the best driver for
your device (Recommended)
and click
on
Next
.