background image

Instruction Manual

6

Once the drive has been secured within the enclosure, connect the DC  

7. 
  12V power adapter to the power adapter port.  Connect the remaining  
  end of the power adapter to an available power outlet.

Connect the USB A-B cable to the USB B port on the rear panel of the  

8. 
  enclosure, then connect the remaining end of the cable  to the host  
  computer.

With the host computer powered on, power on the drive enclosure  

9. 
  using the On/Off switch.  The operating system will detect the presence  
  of the added drive, following which you will be able to properly format/ 
  partition the installed drive from within the operating system.

Technical Specifications

Bus Type

USB 2.0

Maximum Date Transfer Rate

480 Mbps

Enclosure  Casing Material

Aluminum

Power Adapter

12V 2A

LED Indicators

Solid Green -Power status
Blinking Green - Read/Write Drive 
Activity

Drive Capacity Maximum

Up to 1 Terabyte

Chipset

SunPlus SPIF215A

OS Support

Support Window 98/ME/XP/Vista, 
Mac OS 9.0 and up, Linux

Product Dimensions (L x W x H)

193 mm x 113 mm x 31 mm 
(7.6” x 4.45” x 1.22”)

Product Weight

325 g (11.47 oz )

Summary of Contents for SAT3510U2V












Reviews: