StarTech.com S352BMU3N User Manual Download Page 51

Page: 51 / 77

Instruction Manual

WARNING!

It is not recommended that a firmware upgrade be attempted unless

specifically stated on the StarTech.com website, or directed by a StarTech.com

Technical advisor.

WARNING!

It is recommended that all drive DATA be backed up

prior to attempting a firmware upgrade. Lost drive data is not the responsibility of

StarTech.com

To upgrade firmware, visit the StarTech.com website, if a new firmware upgrade is

available and recommended, download and save the file to a location you can easily

access.
Access the Enclosure web GUI and select System Manage – Firmware from the main

menu
Click the browse button, a file explorer window will appear, locate and select the

firmware download in the location it was saved, and click the Open button.

The firmware upgrade will install.

WARNING!

During the firmware upgrade do not turn off the enclosure, close

the browser, or navigate away from the firmware update page. If the upgrade is

interrupted then it could result in damage to the enclosure or data on the drives. Once

the upgrade has completed the enclosure will automatically reboot.

Note:

Update may take several minutes. The below progress indicator will appear

providing a countdown to system reboot.

Summary of Contents for S352BMU3N














































































Search results

Summary of Contents for S352BMU3N

Reviews:

Related manuals for S352BMU3N

Brands by name

Popular brands

StarTech.com S352BMU3N, User Manual

Search results

Summary of Contents for S352BMU3N

Reviews:

Related manuals for S352BMU3N

Brands by name

Popular brands