20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1.
Decide where in the
Server Rack
you want to install the
equipment and insert the
M6 Cage Nuts
in the
Mounting
Rails
.
2.
Line up the
Mounting Holes
on the equipment with the
M6
Cage Nuts
.
3.
Insert the
Screws
through the
Mounting Holes
on the
equipment and into the
M6 Cage Nuts
.
4.
Using a
Phillips Head Screwdriver
tighten the
Screws
,
being careful not to over-tighten.
Adjusting the Mounting Rails
1.
Each
Mounting Rail
has four
M6 Screws
securing the
Mounting Rail
to two
Depth Adjustment Rails
. Two
M6
Screws
are located at the top and two
M6 Screws
are
located at the bottom of a
Mounting Rail
.
2.
Using a
Phillips Head Screwdriver
, remove the four
M6
Screws
and
3.
Remove the
Cage Nuts
from the
Depth Adjustment Rails,
by pinching the two
Prongs
on the back of the
Cage Nut
inwards.
Note:
Use a
Cage Nut Tool
(sold separately), If you are
having trouble removing the
Cage Nuts
from the
Depth
Adjustment Rails
.
4.
Slide the
Mounting Rail
along the
Depth Adjustment Rails
until you have reached the desired mounting depth.
Notes:
The distance between each of the
Mounting Rail
Adjustment Hole
is 7/8 inch.
