16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
11.
Align the
Leveling Feet
with the
Pre-Threaded Holes
on
the bottom of the
Server Rack Frame
.
12.
Using a
14 mm Wrench
, tighten the
Leveling Feet
so that
the four
Leveling Feet
are all at the same height and are
shorter than the height of the
Casters
.
13.
Align the
Notch
in the
Plastic Corner Caps
(x 4) with the
Screw Hole
on each of the corners on the
Server Rack
.
14.
Insert an
M4 x 10 mm Flat Head Screw
through the
Screw
Holes
in the
Plastic Corner Cap
and into the
Screw Hole
on the
Server Rack
. Make sure that the head of the
M4 x 10
mm Flat Head Screw
is securing the
Plastic Corner Cap
in
place.
15.
Using a
Phillips Head Screwdriver
, tighten the
M4 x 10 mm
Flat Head Screws
, being careful not to over-tighten.
16.
Turn the
Server Rack
back over onto the
Casters
.
17.
Align the
Notch
in the
Plastic Corner Caps
(x 4) with the
Screw Hole
on each of the corners on the
Server Rack
.
18.
Insert an
M4 x 10 mm Flat Head Screw
through the
Screw
Holes
in the
Plastic Corner Cap
and into the
Screw Hole
on the
Server Rack
. Make sure that the head of the
M4 x 10
mm Flat Head Screw
is securing the
Plastic Corner Cap
in
place.
19.
Using a
Phillips Head Screwdriver
, tighten the
M4 x 10 mm
Flat Head Screws
, being careful not to over-tighten.
