1
Overview
The StarTech.com 230 Watt power supply is designed to replace older AT style power
supplies in Pentium class or older systems. This power supply increases the reliability of
your workstation by preventing power supply overload. If you’re building your own
computer, this component is essential.
Specifications
Installation
Note: Check the power supply voltage before installation. It should be the same as your local
power voltage (115V for North America and 230V for most of the European countries). Change
the voltage setting if necessary.
1. Disconnect the power cord from your old power supply.
2. Follow your computer case manual and open the case.
3. Disconnect all the power connectors from the mother board and the peripheral
devices such as hard drives, floppy disks, etc.
4. Remove the existing power supply from your computer case and replace it with the
StarTech.com power supply.
5. Connect the power connectors to your motherboard and peripheral devices.
6. Close your computer case.
7. Connect the power cord to the StarTech.com power supply.
Limitation of Liability
In no event shall the liability to StarTech.com Ltd. (or its officers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss,
arising out of related to the use of the product exceed the actual price paid for
the product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement
may not apply to you.
Dimensions
5.9 x 3.35 x 5.87 in. (150 x 85 x 149 mm)
Weight
2.82 lbs (1.28 kg)
Input Voltage
115/230 V
Output Voltage
230W
Connectors 4 x 4-pin LP4 female, 2 x small internal
power, 2 x LED display power, 1 x PS/2
motherboard adapter