19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2.
Loosen the four
M6 x 8 mm Hex Screws
on the side of the
Wall Mount
, using the
5 mm Hex Key
.
3.
Insert the
M6 x 25 mm Hex Screw
into the hole in the
Wall
Mount
and tighten (angle up) or loosen (angle down), using
the
5 mm Hex Key
until the desired angle is met.
(Figure 13)
4.
Tighten the four
M6 x 8 mm Hex Screws
on the side of the
Wall Mount,
using the
5 mm Hex Key
.
5.
Slide the
Upper
and
Lower Decorative Covers
together,
over the
Wall Bracket
, until the two
Covers
snap into place.
Adjust the Swivel
1.
Loosen the
Adjustment Screw
, located next to the
Grey
Adjustment Knob
, using the
10 mm Wrench
.
Figure 13
M6 x 25 mm Hex Screw
M6 x 8 mm
Hex Screws
