Instruction manual
1
Introduction
This M.2 adapter card lets you mount both PCIe and SATA-based M.2 (NVMe) SSDs
inside your computer, through a PCI Express slot. It’s a versatile solution for upgrading
the performance and storage capacity of your desktop computer or server. The M.2
adapter card supports a single PCIe M.2 SSD, plus two SATA-based M.2 SSDs.
The adapter card offers wide installation compatibility, with support for virtually all M.2
drives (2230, 2242, 2260, 2280).
Packaging contents
• 1x 3-port M.2 NGFF SSD adapter card
• 1x low-profile bracket
• 3x M.2 mounting screws
• 3x M.2 mounting standoffs
• 3x M.2 mounting nuts
• 1x screwdriver
• 1x quick-start guide
System requirements
• A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or
x16 slot
• One or two SATA host ports on the host computer (for example, the SATA controller
card, or the motherboard SATA ports inside of your computer)
• An operating system that natively supports PCIe SSDs (NVMe), such as:
o Windows® 7 and later
o Mac OS 10.10.3 and later
Note: When installed in a compatible operating system, the card is natively supported
and doesn’t require any additional drivers or software. However, your operating system
must natively support PCIe SSDs (NVMe – Non-Volatile Memory Express).
System requirements are subject to change. For the latest requirements, please visit
