Event Viewer and Events Windows
The Event Viewer and Events Windows display SATA device-related events that occur
while SATARaid is running. Selecting categories in the Event Viewer window applies a
filter to the Events window so that only messages of the type selected are displayed. This
allows only Warning or Error messages to be seen, for example.
SATARaid Toolbar and Menu Commands
1 - RAID Management
This command allows the management of the RAID sets and drives on the
SATA host adapter. It is available only under Windows 2000 and XP.
2 - System View
This command displays a graphical representation of the host adapter and
RAID sets. Clicking on each of the components and then clicking the Details
button will open a new window showing more information on the selected
device.
3 - Configure SATARaid
This command allows the configuration of the SATARaid program to be viewed
and changed. SATARaid configuration is documented in detail in the next
section of this manual.
4 - Send Configuration
This command allows the SATARaid configuration file to be emailed to the
address selected during configuration.
5 - Save Configuration
This command allows the SATARaid configuration to be saved.
6 - Copy Configuration
This command allows the creation of a copy of the SATARaid configuration file.
7 - SATARaid Help
This command opens an interactive help dialog using the standard Windows
help interface.
Instruction Manual
12
1
2
3
4
5
6
7
Summary of Contents for PCISATA4R1
Page 25: ...Revised 5 April 2006 Rev A ...
