Instruction Manual
12
A9
Returned from E000 ROM control. Going to do any initialization
required after E000 optional ROM control.
AA
Initialization after E000 optional ROM control is over. Going to display
the system configuration.
B0
System configuration is displayed.
A1
Going to copy any code to specific area.
00
Copying of code to specific area done. Going to give control to INT-19
boot loader.
The system BIOS gives control to various BUSes at the following checkpoints to do
various tasks on different BUSes.
POST Code AMI HiFLEX BIOS/WinBIOS Checkpoints of the BUSes
2A
Different BUSes initialization to start if present.
38
Different BUSes initialization to start if present.
39
Display different BUSes initialization error message.
95
Initialization of different BUSes optional ROMs from C800 to start.
