Instruction manual
10
Attach the adapter brackets to a flush mounting surface
To accommodate different TV designs, the FPWTLTBAT comes with five sets of screws
of different lengths and diameters, washers with two hole sizes, and two sizes of
spacers.
1. To select the combination of mounting hardware that you need to use to attach the
adapter brackets
to the TV, complete the following:
• Determine the depth of the mounting holes on the TV.
• Determine the diameter of the mounting holes on the TV.
Note:
If you’re using a TV with a flush mounting surface, you don’t need to use any of
the provided spacers.
2. Position the
adapter brackets
so that the arrows on the flat side of the
adapter
brackets
are pointing towards the top of the TV and the nuts on the
adapter
brackets
are pointing towards the outside edges of the TV. (
figure 5
)
figure 5
top of the TV
Left adapter bracket
Right adapter bracket
Summary of Contents for FPWTLTBAT
Page 13: ...Instruction manual 9 figure 4...
