Instruction manual
7
Installation
Attach the decorative covers
1. Place a
decorative cover
over one end of the
wall mount
.
2. On the back of the
wall mount
, insert a
decorative cover screw
through the top
hole in the
wall mount
and into the
decorative cover
.
Tip!
There are arrows on the front of the
wall mount
to indicate which side is the front.
3. Insert another
decorative cover screw
through the bottom hole in the
wall mount
and into the
decorative cover
. (
figure 1
)
4. Use a Phillips screwdriver to tighten the screws.
5. Repeat steps 1 to 4 to attach a
decorative cover
to the other end of the
wall mount
.
figure 1
Front of wall mount with decorative covers attached
Decorative cover
Decorative cover screw
Back of wall mount
Summary of Contents for FPWTLTBAT
Page 13: ...Instruction manual 9 figure 4...
