20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6.
Use a
Phillips Head Screwdriver
to tighten the screws. Do
not over-tighten the screws.
Note:
If you encounter resistance, stop tightening. Failure to
do so could result in damage to the TV.
Recessed Mounting
1.
Determine the depth and diameter of the mounting holes
located on the back of the
TV
.
2.
Once you determine the correct depth and diameter of the
hardware needed.
3.
Place the
Spacers
(depending on your
TV
configuration)
over the
Screw Holes
on the back of the
TV
.
Note:
Refer to the
Spacer Combination
table for different
hardware combinations.
4.
Align one of the
Vertical Brackets
(with the
Adjustment
Knob
facing outward) with the
Mounting Holes
of the back
of the TV.
5.
Place a
Rectangular Washer
over the
Screw Holes
on the
Vertical Bracket
.