Instruction Manual
4
cause errors and signal degradation.
•
LED indicators
Panel RJ45
LED
Status
Indication
PWR (Green)
Solid
The media converter is powered on
Blinking
The media converter is upgrading (rapid
blinking)
Off
The media converter is not powered on
RPF (Green)
Solid
Remote power failure
Off
Remote power is normal
LFP (Green)
Solid
Link fault pass-through is turned on
Off
Link fault pass-through is turned off
LNK (Green)
Solid
A fiber link between the media converter and
fiber network equipment is established
Off
A fiber link has not been established
LINK - RJ45 (Green)
Solid
A UTP copper link between the media converter
and RJ45 network equipment is established
Off
A UTP copper link has not been established
FULL - RJ45
(Green)
Solid
UTP copper link is set to full duplex
Off
UTP copper link is not set to full duplex (half
duplex)
