Instruction Manual
23
You may connect both the WAN and LAN ports to the same logical network through
redundant Ethernet switches. If one switch fails, the other will be used. When bridging
is enabled, both ports share the same configuration (DHCP or static IP addresses) and
the WAN port may not be separately configured. Using DHCP with Bridging increases
boot time, because the 802.1d (STP) algorithm must finish before the DHCP broadcast
can go out. To change this setting, select either Enabled or Disabled from the drop-
down menu, then click Commit and Apply.
User Accounts
Edit Details
The Edit Details section allows you to modify one user account at a time, by clicking on
the desired account in the User List section. For each host, a user can have:
•
No assigned rights
•
View only rights (no mouse or key interaction)
•
Complete control
Each user has their own default, which will be used if the device name is unknown, or
not explicitly specified.
Summary of Contents for ENTERPRISE CLASS SV1653DXI
Page 9: ...Instruction Manual 4...
