Instruction Manual
3
attention to the folder name, when browsing to the destination file.
6. Click
Next
to continue and click
Finish
to complete the installation.
7. Right-click on the
My Computer
icon, and select
Manage
. Choose
Device Manager
(in the left pane), and double-click on
Ports
(in the right pane).
8. Right-click on one of the newly added ports, and choose
Properties
. Click on the
Data rate
tab, then click on
Detect Crystal Frequency
. Click
OK
to save this setting.
9. Repeat step 9 for each added port.
10. Serial devices can be connected, once the preceding steps are complete.
SSaaffeellyy rreem
moovviinngg tthhee EExxpprreessssCCaarrdd
Please note that in Windows XP and 2000, when the ExpressCard is connected to the
host computer, an icon (depicted below) will appear in the taskbar (normally the bottom
right-hand corner of the screen, near the clock). To ensure safe removal of the
ExpressCard, please click on this icon, select
Stop
, click
OK
and then
Close
, after which
you can safely remove the ExpressCard from the host computer.
