Instruction Manual
2
IInnssttaallllaattiioonn
1. The driver files for Windows are shipped in a .zip format (eg. V409HS.zip). Please
copy the files to your hard drive and unzip them, before proceeding with installation.
15-pin
Connector
Port 1
Port 2
Port 3
Port 4
Expansion Unit
Caution:
It is advisable to remove all possible static discharge potential
from any objects that the ExpressCard may come in contact with before
installation. This can be accomplished by touching a grounded metal object,
prior to insertion.
Warning:
Please do not remove the 15-pin cable when the ExpressCard is
inserted in the ExpressCard slot and the host computer is powered. The 15-
pin connector is not designed to support hot-plugging, so it cannot be
disconnected while the system is running. The hot-plug feature is only
supported by the ExpressCard connector and the Notebook’s ExpressCard
slot.
Driver files can be
found here
2. Connect the 15-pin cable of the Expansion Unit to the ExpressCard.
3. Insert the ExpressCard into an unused ExpressCard slot on the host computer. This
will launch the
Add New Hardware Wizard
. Click on
Next.
4. Select
Install from a list or specific location (Advanced)
and click
Next
.
5. Select
Include this location in the search
, then click on
Browse
to specify the exact
file location (E:\IO\OXFORD\NT4 etc.) and click
Next
to continue. Please note that if
the exact file is not selected, an installation conflict could occur. Please pay particular
Please note:
When installing the software
for EC4S950, ensure that you browse to the
correct operating system folder. Allowing
Windows to search for the file may result in
the incorrect file being installed, as the Driver
CD contains several versions of the
necessary software.
