58
Appendix A
Find and record your computer’s IP configuration settings
Note:
The following instructions are valid for Windows 95/98/Me/2000/XP only. If you
are using a different OS, consult your OS manufacturer for details. If after completing
this procedure you are still unsure of where to find some of the required information,
contact your ISP
for details.
1. Click on Start then Run.
2. Type “cmd” (or “command”) in the field and click OK.
3. At the command prompt, type “ipconfig /all” and press Enter. You should see a
screen with information similar to the following:
You should record the following information prior to connecting the router:
Host Name
(if any):
MAC/Physical Address
:
IP Address
:
Subnet Mask
:
Default Gateway
:
Summary of Contents for BR455GWDC
Page 76: ...Revised October 22 2003...
