Instruction Manual
3
Tighten the security ring on the base mount
When tightened, the security ring locks the hand screw in position to prevent people
from removing the tablet arm from the desk.
1. When the base mount is secured to the table, place the rounded end of the security
wrench
(#8)
onto the security ring on the base mount.
2. Turn the security wrench
(#8)
to the right to tighten the security ring.
Attach a tablet
Warning:
The claws on the articulating tablet arm hold the tablet in place. To avoid
damaging the arm, don’t attempt to adjust the claws when they’re locked.
1. Place the key (
#7
) over the knob located on the back of the tablet mount, and turn
the key to the right.
2. Move the yellow tab on the back of the tablet mount to the right to the unlocked
position.
