Instruction manual
3
Package contents
• 1 x sit-to-stand workstation
• 1 x small hex key
• 1 x large hex key
Raise or lower the ARMSTSL
Warning!
Before you move the workstation up or down, make sure that the equipment
mounted on the workstation is secure. If your equipment is not stable, it could fall off
of the workstation as you move it and the equipment could be damaged.
Pinch hazard!
Keep your fingers away from the moving components when you move
the workstation up or down.
Caution!
Before you raise the workstation, make sure that the cables you’re using are
long enough.
1. To move the workstation up or down, squeeze the paddle located on the right side
of the ARMSTSL. (
figure 1
)
2. When the workstation is at the desired height, release the paddle to lock the
ARMSTSL into position.
figure 1
