Instruction manual
6
figure 2
6. Line up the two holes in one of the desk clamps (lower bracket) (
3
) with the two
holes on the end of one of the desk clamps (upper bracket). Make sure that the
hand screw on the desk clamp (lower bracket) is pointing downwards and away
from the mounting arm.
7. Insert two of the M8x12 mm screws (
11
) through the holes in the desk clamp (lower
bracket) and into the desk clamp (upper bracket).
8. Use the M5 hex key (
9
) to turn the screws clockwise to tighten them. (
figure 3
)
9. Repeat steps 6 to 8 for the second desk clamp (lower bracket).
9
11
3
2
12
figure 3
