Instruction manual
8
Attach the monitors to the VESA monitor mounts
Warning!
To prevent scratching during the installation process, you should handle the
surface of the monitors with care.
Do one of the following:
• To install monitors that have a flush installation surface, insert four of the
M4x12 mm screws (
5
) through one of the VESA monitor mounts (
4
) and into the
mounting holes on the back of the monitor. Use a Phillips screwdriver to tighten the
screws. Repeat the steps for the second monitor that you’re attaching. (
figure 5
)
• To install monitors that have a recessed installation surface, insert four of the
M4x30 mm screws (
6
) through one of the VESA monitor mounts (
4
), into four of the
plastic spacers (
7
), and into the mounting holes on the back of the monitor. Use a
Phillips screwdriver to tighten the screws. Repeat the steps for the second monitor
that you’re attaching. (
figure 6
)
figure 5
figure 6
5
4
Monitor
(not included)
6
4
Monitor
(not included)
7
