Instruction manual
12
Attach the crossbar
1. Place the crossbar over the projection on the mounting arm. (
figure 10
)
figure 10
2. Place the crossbar retainer into the crossbar.
3. Place a mounting-arm washer onto the crossbar retainer.
4. Insert an M8x16 mm screw through the washer, crossbar retainer, and into the
crossbar. (
figure 11
)
5. Use a Phillips type screwdriver to tighten the screw into place.
Warning!
Do not over-tighten the screw. If you encounter resistance while you’re
tightening the screw, stop tightening.
figure 11
Mounting arm
Crossbar
Projection
M8x16 mm screw
Mounting-arm washer
Crossbar retainer
Crossbar
