Instruction manual
7
3. Click
OK
.
4. Follow any other on-screen instructions to complete the installation.
Install drivers in Windows 7
Install natively supported drivers
When the docking station is powered and connected to your host laptop, some of the
device drivers will install automatically.
You may see a pop-up message requesting permission to allow the docking station to
connect to your computer. If a pop-up message appears, do the following:
1. Click on the pop-up message.
2. Click
Always Connect
, in the
Approve Thunderbolt™ Device Attached to Port
drop-down list.
3. Click
OK
.
4. Follow any other on-screen instructions.
Install Ethernet drivers
1. Download the latest driver. Use a web browser and navigate to
2. Click the
Support
tab.
3. Download the
Intel_I21x.zip
driver.
4. When the download is complete, extract the contents of the compressed file that
you downloaded.
5. Navigate to the location where you extracted the driver contents, and open the
Windows
folder.
6. Double-click the
Setup.exe
file and follow the on-screen instructions to complete
the Ethernet driver installation process.
Install USB video drivers
1. Download the latest driver. Use a web browser and navigate to
2. Click the
Support
tab.
3. Download the
Fresco_FL1100.zip
driver.
4. When the download is complete, extract the contents of the compressed file that
you downloaded.
5. Navigate to the location where you extracted the driver contents.
6. Double-click the
Setup.exe
file and follow the on-screen instructions to complete
the USB driver installation process.
