Instruction Manual
13
Note: To use the OAM functions, the
802.3ah Functions
setting must be Enabled
(Default: Disabled).
802.3ah Mode –
(Default: Passive) Used to configure an OAM pair. In a pair, one unit
must be ‘active’, while the other must be ‘passive’. Typically the remote converter (CPE)
would be in ‘passive’ mode and the local in ‘active’.
Link Events –
Enable / Disable reporting of Link Events via OAM.
Remote Loopback –
(Default: Disabled) In order to do a Remote Loop Back test, the
option must be enabled in both converters.
Unidirection Support –
Enable / Disable reporting if Unidirectional Link Detection
events via OAM.
Errfrm_Win (Error Frame Window) –
(Default: 2 seconds) Adjustable from 1 to 60
seconds. This is the "Window" of time used to gather error frames.
Errfrm_Thr (Error Frame Threshold) -
This threshold count can be set from 1 up to 2 x
1032. This count in conjunction with the error frame window, will determine if the Error
Frame event is reported via OAM.
Errfrmprd_Win (Error Frame Period Window) –
(Default: 148800) This frame count
window can be set from 1 up to 2 x 1032 to gather the number of frame errors within
the last x frames.
Errfrmprd_Thr (Error Frame Period Threshold) -
This threshold count can be set
from 1 up to 2 x 1032. This count in conjunction with the frame window will determine
if the Error Frame Period event is reported via OAM.
Summary of Contents for 8STET91000LCOAM
Page 22: ...Instruction Manual 19...
