Data Output (733.1 series)
The 733.1 micrometer comes with an output connection that allows data transmission to a variety of peripherals, either
through a traditional wire;
795.1 Smart Cables
, or wirelessly by connecting to a PC using the
Starrett DataSure®
Wireless Data Collection System.
Each of these methods allows for analysis, data collection, and hard copy
documentation as needed.
A DataSure system is comprised of;
An
EndNode
that is attached to the tool to transmit the data.
A
Gateway
requests and receives the data at the computer.
An optional
Router
is used to extend the range of the system when needed.
There are three 795.1 Smart cables that allow you to connect to a computer via a USB port.
795.1SCU
connects through a USB port on your computer, and is used with data collection software.
795.1SCKB
connects to a USB port on your computer, but is “plug & play” like a Key Board. You can send data to a
number of windows programs like a spreadsheets/databases programs.
795.1SCM
connects to a 4 port Mux, our 7612 or 7613 Data Multiplexers.
You can have up to four tools connected at a
time with each of these multiplexers.
The output format is
4800 BAUD, 8 data bits, no parity, 1 stop bit
, and ASCII data. Transmission is exactly 16
characters, followed by a carriage return and a line feed.
Page 6
62692-0 Screws x3
795.1 Data Cable
Fig.6B
Fig.6A