32 - en
*
depending on equipment variant
5.8 Switching off the vacuum cleaner
▶
Set the operating mode/speed control dial to the >OFF<
position.
↳
The vacuum cleaner is switched off.
▶
Remove the battery/batteries when the device is switched off.
▶
Fix the suction hose to the rear wall of the container by inserting
it into the accessories depot*.
▶
Remove the power tool.
6 Transit
▶
Remove the suction hose.
▶
Seal the suction port with a cap.
▶
Place the top part on the container.
▶
Close the closures on the sides.
▶
Remove the battery/batteries
▶
Place accessories in suitable plastic bags and seal the plastic
bags.
▶
Plug the hose ends together so that no dirt particles escape.
▶
Wrap the hose around the vacuum cleaner and clamp it to the
handle.
Fig. 14: Winding up the suction hose, step 1
Fig. 15: Winding up the suction hose, step 2
Fig. 16: Tool box
l
CAUTION!
Risk of tipping during transport
▶
Transport no more than one tool box on the vacuum cleaner.
NOTE
If the vacuum cleaner is subjected to impact, the batteries may
be damaged.
▶
If possible, remove batteries before transport.
▶
After transport with batteries inserted: check the batteries for
damage (e.g. broken plastic parts).
