19
Maintenance
To clean your digital photo frame, please refer to the instructions below:
NOTE: To prevent electrical shock, do not open the Digital Photo Frame casing. Leave repair of the frame
to qualified personnel, please see the tech support information in the warranty.
1. Unplug the power
Unplug the Digital Photo Frame power adapter from the AC socket before cleaning the monitor.
2. Check the cover
Check to see if the frame and accessories are damaged, broken, or strained. If so, please consult the warranty
card for Tech Support information.
3. Clean
Never spray or pour any liquid directly onto the screen or frame.
Avoid allowing any water or liquid from
entering the Digital Photo Frame or accessories.
4. Cleaner
Use water or non-ammonia/non-alcohol based glass cleaner. Do not use harsh or abrasive cleaners such as
ketene (such as acetone), ethanol, toluene, acetic acid, methane, chloride, or other detergents to clean the
monitor, these chemicals can damage the LCD screen of the frame.
5. Screen
To clean your LCD screen or case, use water or a mild cleaner, as listed above. Moisten a soft, clean cloth or if
possible, use a special screen cleaner sheet or a solution suitable for static electricity application. Using any
cleaner other than water or a mild cleaner may damage your digital photo frame and will not be covered under the
warranty.
6. Storage of Unit
If the Digital Photo Frame is not in use for a long time, please unplug it and store it in its original box in order to
avoid any damage.
7. Disclaimer
Any damage resulting from use of any cleaner that is not mentioned above is not covered under the terms of the
warranty on this product.
