Connect to Wi-Fi
Once the LED is glowing solid white or red, use your Wi-Fi enabled device to
connect using the Network ID printed on the back of the Wi-Fi router.
Can’t Get Online?
Change Network ID/Password
1. If you already have a network ID/password set up, press the reset button at
the bottom of your router. If not, skip this step.
2. When connected to the network, open a browser window on any device and
follow the instructions.
3. Wait ~2 minutes and rejoin network with your personalized credentials.
AUX
Pulsing White: Connecting/Updating
Solid White: Connected to Internet
Solid Red: Not Connected
1. Power cycle the Starlink/router by unplugging the power supply for 30
seconds.
2. Check that your mounting location is correct:
• Does the Starlink have a clear view of the sky?
• Are you installing your Starlink at the address you used when placing your
order?
3. If none of these work, contact Starlink Customer Support by logging into your
account on starlink.com.
Prefer a hardline connection over Wi-Fi? Connect by plugging your computer directly into the upper
port of the Wi-Fi router (ethernet cable not included) or into the white port on the power supply.
01448719-007
Reset
Default Network ID
GET ONLINE
Summary of Contents for Volcano mount
Page 1: ...Starlink Volcano Mount ...
