Diagram for single soundboard version.
Connection definitions:
Be sure to follow the instructions for LED placement.
J1: Labeled DC IN :
Power connection for 3xAA 4.5v battery connector.
J2: Labeled Push-button :
Pre-wired reed switch goes to this connection. Polarity does
not matter.
J3: Labeled STROBE:
Connect voice Glow rod with 4x 5mm blue LEDs here. Note polarity.
J4: Labeled NAV:
Connect pre-wired 6x 3mm white/warm-white harness here to light Robby's
head valves. Note polarity.
6
