Short user’s manual
11
Operation description
•
Security mode
•
Engine blocking
•
Service mode
•
«Emergency security deactivation» mode
•
«Device registration» mode
•
«Programming» mode
To drive a car, equipped with the immobilizer, you must carry along the
tag for authorization. After the tag appears in the main unit’s operational
range, automatic data exchange via the encrypted Bluetooth Smart
protocol takes place. A tag can be a smartphone with the Bluetooth
Smart protocol and registered in the immobilize.
Security mode
The owner is authorized at ignition switch-on. The authorization
method can be a tag and (or) entry of the code by means of the
standard car buttons.
Authorization by the standard car buttons can be used in the following
cases:
•
for security deactivation in the tag absence. In this case,
authorization by code entry shall be set as an alternative;
•
for theft protection in case of tag theft or tag loss. In this case,
authorization by code entry shall be set as the mandatory one.
Authorization by means of the tag is set by default.
Authorization by means of the tag
If the tag was found, the immobilizer goes to the «Security off» mode.
