Part Number: 6280
Page 5
Version 1.0
© 2022 Starkey Products, Inc.
Trouble shooting guide:
LED Lamps won’t turn ON –
Check to make sure the T-Adapter you connected earlier made a good connection – to do this,
unplug the connectors, and re-connect them. You should hear an audible ‘click’ when the
connector fully engages.
Confirm you installed the extension harness properly (for trucks that needed Power Extension
wiring).
Close all doors. Disconnect negative battery cables for 5 minutes, then reconnect and re-test.
Some interior lights or door locks aren’t functioning –
Did your installation require the power extension harness? If so, the connector near the fuse box
you unplugged on page 3 was not re-connected properly or completely. Plugging it back in will
restore function. Be sure to pull the white bar back over until it clicks into place.
Bed Lights do not turn OFF –
Check to make sure you tapped into the correct wire for the #4572 power extension (if part was
required).
Check to make sure all cab doors AND hood are shut. If any are cracked or open, the lights will
not shut off.
If you are still having trouble with your product, please contact us for technical assistance. Tech support is
available via phone Monday through Friday 9am-5pm. Email tech support is available during regular
business hours as well as weekends, holidays, and evenings.
Starkey Products, Inc.
Phone:
(386)-951-6335
Email:
Website:
www.Starkey-Products.com
Limited Warranty:
This warranty covers defects in materials or workmanship in any component sold by Starkey Products,
Inc. or its authorized dealers. Warranty is effective for five years from the date of purchase. Coverage
terminates if you sell or transfer ownership of the product. Starkey Products will repair or replace the
defective or malfunctioning product or any defective or malfunctioning part thereof at no charge. This
warranty covers parts and labor only. This warranty does not cover any problem that is caused by abuse,
misuse, acts of God, or improper installation. Any modification or alteration to any component will void
the product warranty. Warranty does not cover wear that any components receive through the normal
course of operation and use (including but not limited to bulbs). All warranty claims require proof of
purchase.
