5
STEP 9. Locking/Unlocking the Handles :
This misting fan is
equipped with handles for convenient transport. The handles
will be in the locked position when first assembled. Follow these
steps to unlock and lock the handles. Refer to diagram 10. To
unlock the handles, push the L type pin on the handle joint.
While pushing in the L type pin, simultaneously push the handle
up. To lock the handles, push in the L type pin on the handle
joint and simultaneously push the
handle down to the lock position.
ASSEMBLY AND OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS:
1.
This misting fan can operate with
optimal output in temperatures up to 104°F.
2.
Lift up the tank cover and fill the tank with
clean water. Make sure the pump hose is
fully
submersed in water. Replace the tank cover.
3.
Connect the fan to a power supply.
4.
Turn on the fan by adjusting the
power switch to the ON position.
5.
This misting fan has 3 different
fan speeds. Turn the fan speed
dial to adjust the fan speed.
6.
To start the misting function, turn the
misting dial located on the stand pole. The
pump and
misting plate should power on at this time.
7.
To adjust the misting
volume, turn the misting dial.
8.
To empty the tank of water, adjust the
drainage valve located on the back of the
water tank.
