3
ASSEMBLY
DO NOT
plug in the fan before assembly. This misting fan comes in 3 separate boxes. Carefully remove
all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any
of the components. A screwdriver and wrench will be required to assemble this misting fan.
STEP 1. Remove the Water Tank from the Tank Cart
STEP 2. Installing the Water Pump:
Remove the water pump
from the packaging. Position the pump in an upright position and
place it on the beam located at the bottom of the water tank.
STEP 3. Assembling the Stand Pole:
Locate the tank cart and
stand pole. Remove the bolts, spring washers, flat washers and nuts
from the tank cart. Position the stand pole on the tank cart and align
the holes on the pole with the four holes on the cart. Using the bolts,
washers and nuts removed in step a, screw the stand pole into the
tank cart. Make sure the stand pole is securely screwed onto the
tank cart before proceeding to the next step.
STEP 4. Assembling the Fan Head:
Remove the fan head from
box #1. Align the stand pole opening on the bottom of the fan head
with the stand pole and connect the two pieces together. Use the
screw located on the screw attachment to secure the two pieces
together.
