Stark 1200CFM, Owner'S Manual And Safety Instructions, Page: 8 / 19

ASSEMBLY SAFETY WARNINGS
1. Hook the upper handle tabs into the holes on the frame
tube. Use the bottom hole for the lower handle position. Use
the middle hole for the high handle position.
2. Secure the handle on the frame tube with the carriage
screws and star knobs.
UPPER HANDLE
1. Mount the throttle control lever onto the right upper handle
with M5x25 screw and lock nut. Tighten securely using a
8mm wrench and a Phillips screwdriver.
2. Secure the throttle control cable on the handle with cable
clamp.
THROTTLE CONTROL LEVER
There are two positions in which the handle can be attached
- a high position and a lower position.
1. Attach the Z type end of the cable into the lever as shown.
2. Secure the buckle on the cable onto the upper handle.
3. Secure the cable on the frame tube with cable clamp.
FLOW ANGLE ADJUSTMENT CONTROL CABLE
7 8