background image

>> 4

 • Instruction manual • Staring SM 125

Mixer Type . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . SM 125

Mixer Weight . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..  140 kg

Gross Volume .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..  125 l

Net Volume  .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . approx ca. 70 L

Pan Diameter .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .735 mm

RPM.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..35 (l/min)

No. of Mixer Arms .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 3

Discharge Height  .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .800 mm

Electric Moter Output .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1,5/2,2/3,0 kW

Protection .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. IP 54

Voltage  .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 400V

Power Consumption . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..3,7A/5,3A/7,2A 

Electric Moter Output .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1,5 kW

Protection .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. IP 54

Voltage  .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 230V

Power Consumption . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..  9,2A 

Frequency . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 50 Hz

Noise Level at the Working Place (Mixing) .. .. .. .. .. .. .. .. .. .. .. .. 78 dB(A)

Noise Level at the Working Place (Idling).. .. .. .. .. .. .. .. .. .. .. .. .. 58 dB(A)

Mixer Noise Level (Mixing)  .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..  <68 dB(A)

Mixer Noise Level (Idling) .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..  <66 dB(A)

Identifi cation:

The Manufacturer’s type sign states the mixer type. No. in the fi rst fi eld. The second fi eld consists 
of seven fi gures of which the fi rst three fi gures state the machine No., the next two fi gures the 
building year and the last two fi gures the month of the building year. The third fi eld states the net 
weight in kg of the mixer.

>> 1. Technical Data

Summary of Contents for SM 125

















Reviews: