3
4
Press
Press
Press
kg
lb
st:lb
To install / Replace batteries
Setting weight unit
This scale is available in kg or lb. You can set
to the one you prefer by pressing the unit
conversion button on the back of the scale
(picture shown on the left). Press the unit
conversion button when scale is powered off.
LCD shows current weight unit. Press the
button again to convert to another weight unit.
.
When setting lb as weight unit, the
default height unit is feet/inch.
.
When setting kg as weight unit, the
default height unit is cm.
After selecting the prefered unit, the scale
will auto-off after 3 seconds. The selected
weight unit will be activated the next time
you turn on the scale.
Battery baffle
LCD Display
Key Illustration
SET : Turn on the scale / Save parameters / Prompt to next parameter.
(Please refer to the Setting personal parameter section)
: Advance the value by one interval each press. Hold down button to advance more quickly.
: Decrease the value by one interval each press. Hold down button to decrease more quickly.
Regular Weighing Mode
(indicates body weight only)
1. Auto step on weighing
Install battery (please refer
to Page 3) and place the
scale on flat floor.
Displays your weight.
Once weight is stabilized
digits will flash and lock in.
Height Unit
User memory code
Gender
Hydration %
Fat % Muscle %
Bone %
Fat status indication
Age
Weight Unit
Calorie Unit
1- Open battery case cover on the back of scale.
2- Take out the used batteries.
3- Install new batteries by putting one side of
the battery then pressing down the other side.
Please take note to the polarity.
- Do not dispose of batteries in fire.
Batteries may explode or leak.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc),
or rechargeable batteries.
- Please dispose the batteries according to local
municipal regulations.
