StarForm Swift-G OI-G1480, User Manual, Page: 50 / 84

8.1.6 DigitalIOControl
Category that contains the digital input and output control features.
Name Descripton
LineMode Controls if the physical Line is used to Input or Output a signal.
LineSelector
Selects the physical line (or pin) of the external device connector or the virtual line of the
Transport Layer to configure.
LineSource Selects which internal acquisition or I/O source signal to output on the selected Line.
LineStatus Returns the current status of the selected input or output Line.
LineStatusUpdate Trigger a read of the current LineStatus from the camera.
UserOutputSelector Selects which bit of the User Output register will be set by UserOutputValue .
UserOutputValue Sets the value of the bit selected by UserOutputSelector .
8.1.7 GigEVision
Category that contains the features pertaining to the GigE Vision
transport layer of the device.
Name Descripton
GevCurrentDefaultGateway Reports the default gateway IP address to be used on the given
logical link.
GevCurrentIPAddress Reports the IP address for the given logical link.
GevCurrentIPConfigurationPersistentIP Controls whether the PersistentIP configuration scheme is acti-
vated on the given logical link.
GevCurrentSubnetMask
Reports the subnet mask of the given logical link.
GevMACAddress MAC address of the logical link.
GevPersistentDefaultGateway Controls the persistent default gateway for this logical link.
GevPersistentIPAddress Controls the Persistent IP address for this logical link.
GevPersistentIPValidity Checks the current settings for GevPersistentIP.
GevPersistentSubnetMask Controls the Persistent subnet mask associated with the Persistent
IP address on this logical link.
GevSCPSDoNotFragment The state of this feature is copied into the ‘do not fragment’ bit of
IP header of each stream packet.
GevSCPSPacketSize
This GigE Vision specific feature corresponds to DeviceStream-
ChannelPacketSize and should be kept in sync with it.
8.1.8 ImageFormatControl
Category for Image Format Control features.
Name Descripton
ComponentEnable Controls if streaming of the selected component is active.
ComponentSelector
Selects a component to activate/deactivate its data streaming.
Height Height of the image provided by the device (in pixels).
PixelFormat Format of the pixels provided by the device.
Width Width of the image provided by the device (in pixels).
42 of 76