StarForm Swift-G OI-G1480, User Manual, Page: 72 / 84

• Input
. The selected physical line is used to Input an electrical
signal.
• Output . The selected physical line is used to Output an
electrical signal.
8.2.53 LineSelector
Name LineSelector
Category DigitalIOControl
Interface IEnumeration
Access Read/Write
Unit
-
Visibility Expert
Values Line0, Line1
Selects the physical line (or pin) of the external device connector
or the virtual line of the Transport Layer to configure.
• Line0
. Index of the physical line and associated I/O control
block to use.
• Line1 . Index of the physical line and associated I/O control
block to use.
8.2.54 LineSource
Name LineSource
Category DigitalIOControl
Interface
IEnumeration
Access Read
Unit
-
Visibility Expert
Values Off, UserOutput0, FrameOutputToggle
Selects which internal acquisition or I/O source signal to output on
the selected Line.
LineMode
must be Output.
• Off
. Line output is disabled.
•
UserOutput0 . The chosen User Output Bit state as defined
by its current UserOutputValue .
64 of 76