95
STEP 4 – ATTACH T-JOINTS TO TOP FRAME
Tip:
The fitting is very tight.
If you struggle to fully engage the T-joint,
try tapping it on with a leg (Part 6B).
Note:
Please remove foam from Part B at this
step, it will be put back on in step 9.
Tip:
Make sure the holes on all the
steel tubing parts are aligned
and the oval hole at the
bottom of the leg faces
outward.
Note:
Repeat this step to assemble
three more leg sections.
Two circular
holes at top
The oval hole MUST
face outward
FOAM