Starck Sefam S.Box, Service Manual, Page: 41 / 56

Sefam S.Box Maintenance  41

Remove the top cover (be careful to the clip connected to the rear cover).

Remove carefully the IP protection from the main board (take care with grooves, tabs and
capacitors).

Unlock the connector of the display ribbon on the main board (Fig.1), and remove the display
ribbon from the connector (Fig.2).

Unscrew the screw that holds the front panel display with a T6 tip equipped screwdriver
(fig.1).

Depress the bottom of the display from its notch and slide the display upwards to remove it
(fig.2).
Capacito
rs
Tabs
Fig.2
Fig.1 Fig.1