Sefam S.Box
Information and settings
23
Using the SD card
The SD card permits to store the most recent compliance data or to update the device settings.
Saving data
Each time the treatment is stopped, the most recent compliance data memorized by the device are
automatically saved on the SD card.
The memory card can also store the signals acquired in real time for about 3 months. For this
purpose, a memory card has to be inserted in the device while using it.
Once the data is saved, the patient can send the memory card to you and you will retrieve the
compliance data and analyze it using the SEFAM Analyze software.
Then, insert the SD card in the memory card reader of your computer. To retrieve the compliance
data, refer to the user manual of the SEFAM Analyze software.
CAUTION:
Use only authorized SD cards.
Settings update
You can adjust the settings of a device by following the instructions given by the SEFAM Analyze
software, and save them on the SD card. An update of the device settings starts automatically when
the patient inserts the card for the first time.
Service card
A SD card can be configured as a "service card" using the SEFAM Analyze software, in order to set up
a collection of devices with the same default parameters. This allows adjusting only the parameters
specific to the patient. To configure a “service card”, refer to the user manual of the SEFAM Analyze
software.
To use the service card with the device, hold down the button
while inserting the card.
Summary of Contents for Sefam S.Box
Page 1: ......