9
INSTALLATION INSTRUCTIONS
33. Draw a 5 gallon bucket of water to be used in the
brine tank.
34. Pour the 5 gallon bucket of water into the
brine tank. See Figure 42 for location of brine
compartment on single tank models.
35. Measure 1-1/2 oz of chlorine bleach and pour
solution directly into the brine tank or salt
compartment on single tank units.
36. On all tank units, pour salt into compartment. Fill
about 3/4 full initially. Do not pack full. This is also
where iron control agents will be put if you have
rust stains. Replace lids on the salt compartment.
TO PROGRAM THE CONTROL
VALVE, SEE SEPARATELY
ENCLOSED INSTRUCTION
ENTITLED “SETTING THE CONTROL
VALVE.”
