4
TEMPERATURE/TIMER CONTROLLER OPERATION SPECIFICATIONS
Start-up:
. Initially, for approximately 3 seconds the preset grill temperature will be displayed in the top left
display.
2. After 3 seconds, the "Heat On" indicator will remain lit and all four time displays will flash until the
preset temperature is reached.
3. When the control reaches the preset temperature, the "Heat On" light will turn off, all four displays
will stop flashing, and 3 beeps will sound.
Temperature:
. To view the actual temperature, press and hold "Temp Button".
Display will read "Lo F" if temperature is below 50°F.
To Program Time and Temperature:
Note: The controler comes with the default program settings of 450°F at 1:45 seconds.
While programming, if no input is received for approximately 15 seconds, the unit will exit programming
mode and revert to operational mode.
. Press and hold "Temp" (actual temperature displays).
2. While holding "TEMP", press and hold the "START/STOP" button on the left side for 3 seconds.
The display above the "START/STOP" button will change from the time to "- - - -."
3. Release the "TEMP" and "START/STOP." The display on the left side will continue to
display "- - - -." This indicates the unit is in program mode.
4. Press and release the "TEMP" button. The display will now be the current programmed time for
the upper left "START/STOP" button.
5. Change and set the time by pressing and releasing or holding the "START/STOP" button on the
left side to change the time. The time will scroll forward from the current programmed time. Once
the time reaches 9:59, the time will change to 0:00 and continue to go forward. Hold the "START/
STOP" button down for faster changing of the time.
6. Once the time is set, press and release the "TEMP" button.
7. The current programmed temperature will now be displayed.
8. Change and set the temperature by pressing and releasing or holding the "START/STOP" button
on the left side. The temperature will scroll forward from the current programmed temperature.
Once the display reaches 550°F, the display will change to 273°F and continue to go forward.
Hold the "START/STOP" button down for faster changing of the temperature.
9. Once the temperature is set, press and release the "TEMP" button two times.
THE TIME AND TEMPERATURE ARE NOW SET AND STORED IN MEMORY.
Notes:
The "HEAT ON" and "START/STOP" indicator and display will flash until the new programmed temperature
is reached.
Temperature setting is done with the Upper Left Button only. If the time setting is programmed on the
upper left button, that time will also be programmed onto all the other timers. If not time change is made,
all the other timers will remain as programmed with no changes.
All Other Timers Only:
All other timers can be individually programmed by using the following steps:
. To change the time on any of the other timers, press and hold the "TEMP" button and the "START/
STOP" button on the relative display you want to change. The display for that timer will change to
"- - - -." All other displays will go blank. Release the "TEMP" and "START/STOP" buttons.
2. Press the "TEMP" button. The programmed display will now be the current programmed time.
3. Change and set the time by pressing and releasing or holding the "START/STOP" button for that
display. The time will scroll forward from the current programmed time. Once the time reaches 9:59,
it will change to 0:00 and continue to go forward. Hold the "START/STOP" button down for faster
changing of the time.
4. Once the time is set, press and release the "TEMP" button twice.
THE TIME AND TEMPERATURE ARE NOW SET AND STORED FOR THE OTHER
TIMER DISPLAYS.
